Produse pentru magnet din (19)

La serviette en microfibre Water Magnet est une serviette de séchage épaisse et large aux propriétés ultra-absorbantes. (1200 g²/m) La texture douce en microfibre garantit un résultat sans rayures et sans traces sur les surfaces lisses. Vous pouvez sécher complètement une voiture sans l’essorer. L’accessoire idéal pour les garages, les tunnels et les lavages manuels, détaillants etc. Dimensions:60 x 40 cm Poids:1200 g/m² Composition:80% polyester - 20% polyamide Emballage:50 pcs/carton

MaxX hefmagneten zijn de meest krachtige hefmagneten ter wereld. Voor het heffen van vlakke- en ronde producten. Dank zij hun compacte bouwvorm zijn ze gemakkelijk hanteerbaar en eenvoudig te bedienen. Verkrijgbaar in een capaciteit van 125 kg tot 2000 kg. Veiligheidsfactor 1:3 5 Jaar garantie

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. HEA-HEB-IPE-IPN:80-600 mm WLL:1.300 kg Max. Length:6.000 mm

Backup wrenches: These are used instead of the classical backup wrenches. are magnetic and much lighter in weight. Safety backup systems With the backup wrenches of the Lokrite Safety Backup Systems, you are assured of a safe way to prevent rotation. The backup wrenches of the Lokrite Safety Backup Systems are available in several dimensions and are very solid but simple in design. Slim design: fits on most places with a minimum of space, in width as well as in total length. Easy handling: easy to install and easy to operate with which allows you to work swiftly. No fingers between the backup wrenches. Prevents the locknut / safety nut from turning. Easy to remove after assembling.

Magnet webbing roller - For lashing webbing

De Water Magnet microvezeldoek is een dikke en grote droogdoek (1200 g²/m) met ultra-absorberende eigenschappen. De zachte microvezeltextuur garandeert een krasvrij en streeploos resultaat op gladde oppervlakken. Met deze doek droog je een wagen volledig af zonder uit te wringen. Het ideale accessoire voor garages, car washes, professionele detailers,... Afmetingen:60 x 40 cm Gewicht:1200 g/m² Samenstelling:80% polyester - 20% polyamide verpakking:50 stuks/karton

The Water Magnet microfibre cloth is a thick and large drying towel with ultra-absorbent properties. The soft microfibre texture guarantees a scratch-free and streak-free result on smooth surfaces. (1200 g²/m) With this cloth you can dry a car completely without wringing it out. The ideal accessory for garages, car washes, professional car detailers,... Dimensions:60 x 40 cm Weight:1200 g/m² Composition:80% polyester - 20% polyamide Packaging:50 pcs/carton

Electro Permanent Magnetic Beam with integrated Battery Group. 10 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 12.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. Length Steel Plate:2.500 - 12.000 Width Steel Plate:1.200 - 3.200 Min. Thickness Steel Plate:5 mm WLL:10.000 kg

Electro Permanent Magnetic Beam with integrated Battery Group. 6 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. Safety Factor of 3. Length Steel Plate:500 - 6.000 mm Width Steel Plate:500 - 2.500 mm Min. Thickness Steel Plate:5 mm WLL:6.000 kg

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar. SWL-flat:2000 kg SWL-round:1000 kg Safety factor:3

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar. SWL-flat:1000 kg SWL-round:500 kg Safety factor:3

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 18.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. HEA-HEB-IPE-IPN:80-600 mm WLL:3.900 kg Max. Length:18.000 mm

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. HEA-HEB-IPE-IPN:80-600 mm WLL:2.600 kg Max. Length:12.000 mm

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Electro Permanent Magnetic Beam with integrated Battery Group. 8 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 9.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. Length Steel Plate:500 - 9.000 mm Width Steel Plate:500 - 2.500 mm Min. Thickness Steel Plate:5 mm WLL:8.000 kg

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar. SWL-flat:5000 kg SWL-round:2500 kg Safety factor:3

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar. SWL-flat:1500 kg SWL-round:750 kg Safety factor:3

Backup wrenches: These are used instead of the classical backup wrenches. are magnetic and much lighter in weight. Safety backup systems With the backup wrenches of the Lokrite Safety Backup Systems, you are assured of a safe way to prevent rotation. The backup wrenches of the Lokrite Safety Backup Systems are available in several dimensions and are very solid but simple in design. Slim design: fits on most places with a minimum of space, in width as well as in total length. Easy handling: easy to install and easy to operate with which allows you to work swiftly. No fingers between the backup wrenches. Prevents the locknut / safety nut from turning. Easy to remove after assembling.